Huawei USG6000 - Page 79

[sysname] cpu-usage monitor
<sysname> display cpu-usage
PU Usage Stat. Cycle: 10
(Second)
CPU Usage : 13.0% Max:
14.2%
CPU Usage Stat. Time : 2016-09-18
22:12:58
CPU utilization for ten seconds: 13.0% : one minute: 13.0% : five minutes:
13.0%
¡¡
In any view, run the display health command to check the CPU and memory usage.
<sysname> display health
¡¡
System Memory Usage
Information:
System memory usage at 2016-11-17
21:10:41
-------------------------------------------------------------------------------
Slot Total Memory(MB) Used Memory(MB) Used Percentage Upper
Limit
-------------------------------------------------------------------------------
0 7850 4789 60%
95%
-------------------------------------------------------------------------------
System CPU Usage
Information:
System cpu usage at 2016-11-17
21:10:41
-------------------------------------------------------------------------------
Slot CPU Usage Upper
Limit
-------------------------------------------------------------------------------
0 13%
80%
-------------------------------------------------------------------------------
¡¡
If the CPU and memory usage before and after the upgrade differ slightly, the device runs
properly.
Checking the Registration Status of Interface Cards
Run the display device command in any view to check the registration status of interface
cards.
<sysname> display device
Device status:
Slot Sub Type Online Power Register Status
Role
-------------------------------------------------------------------------------
0 - RPU Present PowerOn Registered Normal
Master
1 - FIBA Present PowerOn Registered Normal
NA
6 - PWR Present PowerOn Registered Normal
NA
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70