Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 69 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Zones
Use the ZONES configuration screen to create and manage communication zones in an Elemec3 system.
A zone is a set of output destinations for events. The destination types that zones include are amplifier
channels, configured zone(s), outputs, output groups, logic flags, and IP destinations.
Figure 71. Zone Configuration
Add Zones
1. Click ADD ZONE… to open the CREATE NEW ZONE dialog box (see Figure 72).
2. Enter the zone description
3. click CREATE NEW ZONE to continue to the ZONE BUILDER screen.
Figure 72. Create New Zone
To Next Page
Loading...
