Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 88 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Aux IP Inputs
Enable the necessary auxiliary IP inputs on the SOURCES ENABLED portion of the AUDIO INPUTS screen
before they become active on this screen (see the Sources Enabled section). Select an enabled IP AUX
INPUT to open the EDIT IP INPUT PROPERTIES dialog box (see the IP Aux #1–8 Audio Input Properties
section for information on these inputs).
Figure 94. Edit IP Input
Aux IP Outputs/Monitor Out
Selecting either the IP AUX OUTPUT or the IP MONITOR OUT opens the EDIT IP OUTPUT
PROPERTIES screen. The IP MONITOR OUT audio destination transmits all audio that the analog
MONITOR OUT transmits from the system.
Figure 95. Edit IP Output Properties
Multicast Group—IP address for the IP aux output.
Multicast Port—port address for the IP aux output.
Time to Live—multicast time to live for the IP packets.
MTU—maximum transmit unit for the IP packets.
To Next Page
Loading...
Need help?
General
