Hughes 9502 - Feature Management and M2 M Settings

9502 User Guide
3004146-0001 Rev H
29
Port Forwarding Page
The Port Forwarding page is only available in NAPT mode and
includes:
 DMZ – if enabled, all packets received from the space link
that are not routed to other addresses will be forwarded to
the DMZ host address.
 Port Forwarding Rules. These fields allow you to
configure rules defining how packets of particular
protocols are routed, e.g. TCP port 80 for HTTP. Port
Forwarding rules are applied before the DMZ rule.
Figure 2-10 – Port Forwarding Settings