Hunter Douglas Vignette Series User Manual

OPERATION
11
Operate the Shade
EasyRise
™
Shades
To Lower the Shade:
■ Pull down on the rear cord of the cord loop to lower the shade.
IMPORTANT: If the cord tensioner moves with the cord, you
have not secured it to the wall or window frame. You must do
so for the shade to operate properly. See the Universal Cord
Tensioner Installation Instructions in the kit included with
yourshade.
To Raise the Shade:
■ Pull down on the front cord of the cord loop to raise the shade.
Top-Down/Bottom-Up Shades:
■ The left cord controls the bottom rail. The right cord controls
the middle rail.
IMPORTANT: You must first lower the bottom rail before
lowering the middle rail. Likewise, you must first raise the middle rail before raising the
bottom rail.
LiteRise
®
Shades
To Lower the Shade:
■ Slowly and steadily pull down on the bottom rail handle.
To Raise the Shade:
■ Slowly and steadily push up on the bottom rail handle. Allow
the shade to stack evenly.
Top-Down/Bottom-Up Shades:
■ Raise or lower the middle rail by slowly and steadily pushing
up or pulling down on the middle rail handle.
IMPORTANT: You must first lower the bottom rail before
lowering the middle rail. Likewise, you must first raise the
middle rail before raising the bottom rail.
Lower Raise

Hunter Douglas Vignette Series Specifications

General

Series	Vignette
Operation	Manual or motorized
Fabric Options	Variety of colors and textures
Material	Fabric
UV Protection	Yes
Energy Efficiency	Yes (insulating properties vary by fabric)