OPERATION
20
Operate the Shade
For better support and smoother operation, as well as to avoid soiling the fabric, use the
handle(s) when opening and closing the shade. If handles were ordered for the secondary rail(s),
both the primary moving rail(s) and the secondary rail(s) can be used to position the fabric panel
anywhere along its travel with any degree of closure.
NOTE: With a split stack shade, each panel operates independently.
■ To operate the shade, simply use the handle(s) to slide the vertical rail(s). Allow the shade to
stack evenly.
Test Operation
■ Open and close the shade several times.
■ If the shade does not operate smoothly or if the vertical rail(s) do not hold their position, see
“Perform the Final Cord Adjustment” on page 18.
To Next Page
Loading...
