Dynamic balancing will always display two weight planes. It provides a more complete balance than static balancing.
Dynamic balancing should be selected whenever possible to minimize vehicle vibration.
Switching from SmartWeight Balancing Technology® to Traditional Dynamic Balancing
At any time, SmartWeight Balancing Technology® can be switched to standard balancing provided that both standard and
SmartWeight® balancing modes are enabled in setup.
Selecting the SmartWeight® button to display the SmartWeight® menu buttons.
NOTICE
When changing to traditional dynamic balancing mode, weight amounts as well as weight placement locations
change.
Static Balancing – Traditional Balancing Mode
NOTICE
Enter wheel dimensions before selecting dynamic balancing. If SmartWeight® mode is enabled in setup, the
balancer will return to SmartWeight® balancing upon dimension entry.
Static balancing provides a less desirable balance than dynamic balancing. Dynamic balancing should be selected
whenever possible to minimize vehicle vibration.
Switching from Traditional Dynamic Balancing to Traditional Static Balancing.
In non-SmartWeight® mode, the balancer can be switched from dynamic balancing to static balancing.
Dynamic mode is selected: Select static mode icon to switch to static mode.
Blinding and Rounding
In non-SmartWeight® mode, the balancer can display either an “actual” or “blinded and rounded” amount of imbalance.
Selecting the magnifying glass icon next to the dynamic or static icons will toggle blinding and rounding on or off.
HD Elite Wheel Balancer
Page 21 of 51
To Next Page
Loading...
