Hunter HD Elite - Optional HammerHead TDC Laser Clip-On Weight Locator

Dynamic mode, blinding/rounding is disabled: Static mode, blinding/rounding is enabled:
3.9.4. Tape Weight Menu & Split Spoke Feature
Tape Weight Menu
By touching a weight on the wheel, such as the strips of weight shown below, a weight style menu will appear. This offers
the ability to change to another style of tape weight and/or split the weight. This can improve balancing accuracy.
Split Weight®
The split weight® software fans the weight on selected plane into two smaller weights. Repeated touches of “Split
the Weight” will provide alternate choices where the weights fan further apart but become larger to accommodate the
correction needed.
Correcting Large Imbalances
Split Weight® can also be used to apply three weights when needed.
Split Spoke® Feature
When in either mixed weight or adhesive weight modes, (dynamic or static), correction weights can be hidden behind the
spokes of a wheel.
Split Spoke® can be turned on as used as the default based on the wheel scan. If the Split Spoke® feature of hiding weights
behind spokes is to be used, touch “Spokes” > “Enter Spokes”. Follow the on screen instructions. Move to the next spoke
and repeat. 2 spoke locations are be entered. Continue the balance procedure as normal.
NOTICE
When SmartWeight® is enabled in conjunction with wheel spoke entry, the “SmartSpoke®” weight locator
feature can in many instances allow the use of weight at only one spoke when it would have required two using
conventional spoke mode balancing.
3.10. Optional HammerHead TDC Laser Clip-On Weight Locator
The balancer will nd the TDC for the left or right weight plane if “Servo-Stop” is enabled. “Servo-Stop” will hold the wheel in
the TDC position while the servo-activated laser automatically locates TDC to aid in fast clip-on weight positioning.
The HammerHead® TDC Laser System automatically displays a vivid line at top dead center after a wheel has been spun.
The laser turns “off” when the wheel is spun again.
CAUTION
Use of controls or adjustments or performance of procedures other than those specied herein may result in
hazardous radiation exposure.
HD Elite Wheel Balancer
Page 31 of 51