M.36 Part. N. 8000 H0368 (09-2008)
ELECTRIC SYSTEM, DIGITAL INSTRUMENT
FUSES
• When a fuse (1) burns out, always investigate why the fuse has burnt out. Find
the cause, repair and then substitute the fuse.
• Do not utilise a fuse of a different capacity from the original one.
• Do not utilise wire or any other substitute for the fuse.
SEMICONDUCTOR PARTS
• Do not drop semiconductor parts such as those incorporated in the ECU or in
the voltage regulator-rectifier.
• When checking these parts, carry out the instructions to the letter. The lack of
using the correct procedurecan cause grave damage.
BATTERY (TE-SMR-TXC)
- when assembling, first remove the BLACK negative cable, then the RED posi-
tive cable;
- when reassembling, first connect the RED positive cable, then the BLACK
negative cable.
1
To Next Page
Loading...
