44 Excelon Operator’s Manual
Execute Right/Left Synchronization
(The data change will be applied for both Right AND left Lens simultaneously)
Cancel Right/Left Synchronization
execute EDGING MODE
(Based on the current Layout Data)
• Be sure to execute Boxing Center for the followings.
☞ PD is in eccentric position
☞ Horizontally Wide Frame
☞ Super Hydrophobic Lens or Ultra Hi-Index Lens
• In case of Layout with Monocular PD
, be sure to cancel Right/Left
Synchronization .
• If the operator presses the TAB button instead of F7, the next display mode,
Edging display will be shown. But, In this case, the Edging display is not based
on the current layout data, but based on the previous edging data.
• In case of One Eye Tracing, it is recommended to input the Bridge Size
instead of FPD.
• In case of executing the options for Bi-Focal(Near Vision) and Bland Lens
(Near Vision) , Near Vision Shape will be displayed on the LCD screen. If
you input the diameter, you can see the frame shape similar to the actual lens
shape and check the interference.
To Next Page
Loading...
