90 Excelon Operator’s Manual
7.5 Water Tank Draining
Location : User Mode Maintenance Water Tank Draining
Execute Pumping Stop Pumping
① Disconnect Water Supply Hose and put it in the small container.
② Select Water Tank Draining in the Menu.
③ Press Pumping Button to transfer the water to the container
④ After completing the transfer, press Stop Button and connect Water Supply Hose.
• It is recommended to replace the water used for a certain period of time to
maintain the Edger performance. (It may vary depending on the Edging
Condition)
To Next Page
Loading...
