48 Excelon Operator’s Manual
The following three safety checking is executed before entering ‘Edging
Option Mode’.
Lens Adapter interference
Frame change lens interference
PD eccentricity
If there is any problem while executing the safety check, warning messages
will be displayed on the status area. According to the guides of these warning
message, you can correct easily the problem. The followings are the meaning
and the solution guide of these warning messages.
Lens Adapter Interference (I)
Use the Boxing center mode instead of the Optical center mode
Lens Adapter Interference (II)
Use small lens adaptor or apply boxing center mode.
Lens Adapter Interference (III)
Edging impossible. Use different frame data.
To Next Page
Loading...
