86 Excelon Operator’s Manual
Feeler Calibration
Procedures for feeler calibration
① Execute ‘Feeler Calibration’ item
② Replace Block Adapter with Standard JIG
③ Press [F6] to execute or [F7] to return to menu
④ After calibration, press [F1] to save or [F2] to discard
Safety beveling & Grooving Calibration
Procedures for SB&G calibration
① Execute ‘SB&G Calibration’ item
② Replace Block Adapter with Standard JIG
③ Press [F6] to execute or [F7] to return to menu
④ After calibration, press [F1] to save or [F2] to discard
To Next Page
Loading...
