88 Excelon Operator’s Manual
Execute the dressing for the Main Wheel
Execute the dressing for Safety Bevel Wheel
Stop Wheel Dressing
① Execute Wheel Dressing in the MENU
② Select the dressing work for the Wheel (Main/Safety Bevel)
③ Rubbing the appropriate Dressing Stick to the Wheel softly
(Dressing Sticks are provided as standard accessory in the toolbox)
• Dressing Stick for Finishing Wheel/ safety Beveling : WA320
• Dressing Stick for Polishing Wheel : WA1000
• Dressing Stick for Glass Roughing Wheel : WA320
④ Execute Button to complete the Wheel Dressing
• It is recommended to carry out Wheel Dressing after 1,500 ~ 2,000 Edging Jobs
in order to maintain the Wheel performance. (It may vary depending on the
Edging Condition)
• Be sure not to execute Wheel Dressing for Grooving Wheel.
• Be sure that any part of human body or clothing is not interfered with the edging
wheel during the Wheel Dressing. Otherwise, the person may be seriously
hurt.
To Next Page
Loading...
