149
8. Warning List
Warning
No.
Warning Picture Cause Action
25
Impossible to start auto cycle
because reference switch is off
Bar feeder in reference
position but reference
switch is off
Check Reference switch
29
Impossible to start auto cycle
because bar feeder in chucking
mode.
You select chucking
mode at bar feeder, so
you can’t start auto
cycle.
(when you select
chucking mode )
Cancel chucking mode
function
30
When you select chucking mode,
pushrod not in reference position
When you select
chucking mode,
pushrod not in
reference position
-Touch on <NEXT>.
-Select manual mode at bar
feeder and go to reference.
To Next Page
Loading...
