Changed Page Description of Change IM358 Rev 0 to 1 5/1/00
0.04 Added Fume Emissions to TOC
2.02 text edit
2.09 Changed p/n of remote current control to 077020
3.01 Added "Fume Emissions" to TOC
3.02 Referenced appendix C
3.04 Added Fume Emissions reference
3.05 Referenced appendix D
3.08 Added note to install water cooler etc. lower than torch
3.10 Changed TB3 & TB4 picture
3.15 Changed graphic of plasma and shield sense hoses
3.16 Added 60 ft hose lengths
3.19 Added note referencing Post Installation
3.21 Changed TB3 & TB4 picture
3.21 Added pierce complete and error counter signals to Machine interface cable
3.23 Added graphic showing correct mounting of torch to leads
3.24 text edit
3.24 bumped page
3.25 bumped page
3.26 bumped page
4.11 Changed range of pressure readings from +/- 2 psi to +/- 3psi
4.13 Changed p/n of 400A nozzle and swirl ring
4.13 Changed graphic and text to capabilities chart
4.14-4.21 Converted metric tables to more common thicknesses; changed p/n of 400A nozzle and swirl ring.
5.1 Changed 160 C to 160 F
5.3 New graphic of chopper
6.1 Changed graphic and part numbers for 400A nozzle and swirl ring
6.11 Changed graphic and part numbers for 400A nozzle and swirl ring
6.12 Changed part numbers for 400A nozzle and swirl ring cw and ccw
7.05 Changed p/n of remote current control to 077020
7.04-7.22 Uprevved wiring diagrams to E
c.0 Added appendix for gas regulators
d.0 Added appendix for noise levels
Page 4
To Next Page
Need help?
General
