HySecurity SlideDriver 15 Programming & Operation Manual

22 D0559 Rev. A SlideDriver/SlideDriver 50VF Series www.hysecurity.com
dC power supplY (ups) ConneCtIons
DC Power
Supply
Cabinet
Conduit
If you have a gate operator with a DC Power Supply unit, you will need to
connect the primary AC input power to the DC Power Supply.
Additional ¾-inch (19 mm) conduit is needed for electrical wiring
interconnections between the gate operator and DC Power Supply
Cabinet. AC input power is connected to the electrical components in
the chassis, and additional wiring is run through conduit to the DC Power
Supply Cabinet.
A supplemental manual (D0598), provided with the DC Power Supply
Cabinet, describes the installation overview, wiring and conduit
considerations.

HySecurity SlideDriver 15 Specifications

General

Brand	HySecurity
Model	SlideDriver 15
Category	Gate Opener
Language	English