i-PRO WJ-NX310K Series User Manual

N
o
t
e
:
●
Some monitors may not be detected even if the monitor's power switch is
turned off.
N
o
t
e
:
●
The frame rate of the live image varies depending on the camera model
and camera mode.
■
Other setup
[Detect a power-off of the sub monitor (HDMI)]
If checked, when a sub-monitor is used in the configuration, the camera will notify you with
an error behavior if the sub-monitor is not connected or powered off.
[Display stream 2 live image when displaying on the monitor with 1-screen
display.]
Mark the checkbox to display 1-screen live image on stream 2.
Configure the settings relating to network [Network]
The settings relating to the network of the recorder are configured on the setup menu - the
"Advanced setup" menu - the "Network" page.
The "Network" page has [Basic], [e-Mail], [TCP alarm notification], [HTTP alarm] and
[NTP/SNMP] tabs.
Configure the basic network settings [Basic]
The basic settings relating to the network can be configured on this tab.
[Setup via recorder's main monitor]
103

i-PRO WJ-NX310K Series Specifications

General

Brand	i-PRO
Model	WJ-NX310K Series
Category	Measuring Instruments
Language	English