●
The current date is displayed in aqua.
●
The date on which the recorded image is stored on the HDD will be
displayed in white.
Play images from a designated point
It is possible to start playback from a designated date & time or the latest recorded image.
Play image recorded at a designated date & time
Start playback by designating the date & time of a recorded image on the date & time
operation panel.
Date & time operation panel (normal display)
Step 1
Click the [
▲
]/[
▼
] button in the [Playback] box to set the date & time to be played.
Step 2
Select the month from the calendar in which date & time of the image to play back is
included.
Click the [<<Y]/[Y>>] button to change the year and the [<M]/[M>] button to change the
month.
Step 3
Click the date & time of the image to play back from the calendar.
→
The background of the selected date turns green, and playback starts at the designated
date & time.
The date & time operation panel will turn to the playback display and the playback
operation panel will be displayed on lower section of the date & time operation panel.
☞
Playback by designating a timeline
☞
Playback operation panel
[Operation via recorder's main monitor]
282
To Next Page
Loading...
Need help?
General
