menu related to ONVIF connections. Normally there is no need to change the default
settings. Do not normally use it.
Display data output logs
Click the [View>] button of [Data output logs] in [Maintenance] - [System administration]
to check the history of users who have copied or downloaded data. Up to 100 records are
stored, and when the number of records exceeds 100, the oldest records are overwritten.
View OSS licenses
Click on "Click here for OSS information" under [Maintenance] - [System management], and
the license of the OSS in use will be displayed.
Download root certificate
Click [Execute >] under "Download root certificate" in [Security] – [Communication] to
download the root certificate.
Update the fir m ware
To update the firmware of the recorder to the latest version, proceed as follows.
Refer to the following section for the operation procedures if the software is saved on the
USB medium.
☞
Configure the settings and operations relating to the system [System management]
Step 1
Download the firmware of the latest version onto a hard disk drive of a PC.
Step 2
Click the [Maintenance] button and then click the [System management] tab.
[Setup on browser]
374
To Next Page
Loading...
Need help?
General
