Restrictions when using this product
When using this product, some functions have the following restrictions. Before using this
product, keep the following in mind.
Restrictions for individual cameras are posted on our support website.
When connected to a monitor
●
If a sub-monitor is connected while the main monitor is displaying images, the main
monitor will go to black for a few seconds. The same applies in the reverse case.
When using a 4K-compatible monitor
●
When displaying on 1-screen, videos of 60 fps will be thinned out to 30 fps.
When displaying live images from the camera
●
Black screen may be displayed for the first several seconds (*) when the following
operations are performed while displaying live images.
・
When live images are displayed (by switching camera, etc.)
・
When the number of screen divisions is switched.
●
When switching cameras, switching the number of split screens or using sequence
display on the main monitor or sub monitor, depending on the camera, the font size in
the camera image displayed on the other monitor may appear different.
●
When a live image from a camera with a recording frame rate set to from 25 ips to 60
ips is displayed on a monitor, some subjects may not be displayed smoothly.
●
After settings are changed, it may take up to 10 seconds for the camera's live image to
be displayed.
When playing recorded images
●
First several seconds (*) may be skipped when the following operations are performed
while playing recorded images.
・
When cameras are switched
・
When the number of screen divisions is switched (When zooming into/out of a
paused recorded image, an image occurring several seconds before or after the
displayed image may be zoomed in.)
・
When the playback button is clicked again while playing images
Preface
3