●
When no operation is made for 10 seconds or more, the mouse cursor will
be hidden. The mouse cursor will be displayed again when the mouse is
moved.
●
It is impossible to connect a mouse to the mouse connection port if the
connector from the mouse is upside down. When it is hard to connect,
check the upside down position of the connector.
Basic operations
To operate, use the mouse connected to the recorder to move the mouse cursor displayed
on the main monitor and left-click the buttons or tabs displayed on the screen.
(Hereinafter, "Left-click..." will be described as "Click..." in this document.)
In lines where the [
▲
]/[
▼
] buttons are displayed, the value on which the cursor is placed
can be changed by turning the mouse wheel. For example, when setting date & time, the
hours, minutes and seconds can be changed.
The shape of the mouse cursor will change as follows depending on the display screen and
mouse operation.
: Normal operation
: When dragging a camera number panel (wide view screen)
Logout
Click the [Logout] button. To log out, click the [OK] button in the confirmation window
displayed.
[Operation via recorder's main monitor]
237
To Next Page
Loading...
Need help?
General
