●
Recording may not be performed for around 3 seconds in the following
cases. However, this is not a malfunction.
・
When the settings are changed and the setup menu is closed during
recording
The following recording operations are available.
Schedule recording: Recording that is automatically performed at the designated time
range on the designated day(s) of the week
Event recording: Recording that is automatically performed when an event occurs (such as
terminal alarm/camera site alarm/command alarm, etc.)
Emergency recording: Gives priority to recording video and audio at emergency using the
external switch connected to the emergency record input terminal of
the recorder.
Event type
The following event recording types are displayed in list form on the web browser:
SCH: Schedule recording
EMR: Emergency recording
SD: SD backup rec.
The following are detailed event recording types.
COM: Displayed when a command alarm occurred
TRM: Displayed when a terminal alarm occurred
CAM: Displayed when a camera site alarm occurred
PRE: Pre-event recording
SW1 to SW16: Extension software alarm
*Camera site alarms sent from the extension software will be recorded as extension
software alarms.
Preface
9
To Next Page
Loading...
Need help?
General
