daytime and at night after appropriately configuring the area settings and the sensitivity
settings according to the camera installation conditions and possible movement of
subjects. When the detection function does not work or false detection occurs, use a sensor
separately. Refer to the operating instructions of the camera for further information.
Time display of recorded images
When displaying recorded images, the displayed date & time may sometimes skips. This is
not a malfunction.
The displayed date & time on the monitor and the recorder may sometimes not be exactly
the same. This is also not malfunction.
Response to the mouse operations
While this recorder is processing multiple operations at the same time, the response to the
operations from the connected mouse may temporarily become slow or multiple mouse
cursor will be displayed. This is not a malfunction.
Black s creen displayed when playing recorded images
In the following cases, a black screen may be displayed during playing recorded images.
However, this is not a malfunction.
●
When changing cameras or screen patterns during playback or pausing
●
When skipping/reverse skipping during playback
●
When fast forwarding/reverse fast forwarding during playback
●
When the latest recorded image is played while displaying images on a multiscreen*
●
When changing the selected camera during the multi-screen display
●
When going to the next recording event list by fast forwarding/reverse fast forwarding
or skipping/reverse skipping during playback
●
When playback operation is affected by another operation (such as when receiving
multiple alarms sequentially or while copying is being performed simultaneously)
* Some camera images go black depending on the data volume.
Recording operation
The recorder can connect cameras and record their images on the HDD.
Preface
8
To Next Page
Loading...
Need help?
General
