Preface
About the user manuals
This operating instructions compatible with firmware version Ver.1.00 of WJ-NX510K Series,
WJK-NX410K Series and WJ-NX310K Series.
WJ-NX510K Series refer to WJ-NX510K, WJ-NX510KG and WJ-NX510KGV.
WJ-NX410K Series refer to WJ-NX410K, WJ-NX410KG and WJ-NX410KGV.
WJ-NX310K Series refer to WJ-NX310K, WJ-NX310KG and WJ-NX310KGV.
Unless otherwise noted, the screen and other descriptions in this manual are based on the
WJ-NX310K as an example.
●
For more information about our and Panasonic cameras in this manual and on the
screen, contact your dealer.
●
The maximum number of cameras for each model listed in this document is as follows.
NX310K Series Up to 32 cameras*
NX410K Series Up to 64 cameras*
NX510K Series Up to 128 cameras*
*When using the Additional Camera Kit (option).
●
The "n" in "camera n" in this manual indicates the maximum number of cameras for
each model.
●
"<Control No.: C****>" used in this document is the number used when searching for
the relevant information on our support website below.
https://i-pro.com/global/en/surveillance/training-support/support/technical-information
In this manual, differences in functions and screens depending on the model are indicated
as follows.
[NX310]: Functions and screens that are only compatible with the NX310 Series.
[NX410/NX510]: Functions and screens compatible only with NX410K Series and NX510K
Series.
Preface
1
To Next Page
Loading...
Need help?
General
