●
The corresponding recorded data that is displayed in the selected log list
cannot be played if the data has already been overwritten or erased.
●
The images recorded by the camera's motion detection alarm can be
selected and played back from the alarm history.
[Back] button/[×] button
Click this button to return to the date & time operation panel (playback display).
Search and play
Search a desired recorded image and play it. There are the following 3 searching methods.
●
Play images selected from alarm and error logs (Log search)
●
Display thumbnail screen and paly back (Thumbnail search)
●
Search and play images recorded triggered by the motion detection of the camera
(VMD search)
Play images selected from logs (Log search)
Display the alarm log list or error log list, and click a date & time to play the corresponding
recorded images.
Step 1
Click the [Alarm] button or [Error] button on the status display panel.
→
The corresponding [Log] buttons will be displayed.
Step 2
Click the [Log] button.
→
The alarm log panel or error log panel will be displayed. It is possible to switch between
list pages by clicking the [Previous]/[Next] buttons.
[Operation via recorder's main monitor]
289
To Next Page
Loading...
Need help?
General
