●
If "On" is selected for the "Auto login", login will be automatically
performed by the user registered in "Auto login user" in the logged-out
state. Refer to the following section for "Auto login".
☞
Configure the settings relating to the user management [User
management]
Login operation at startup
When "Off" is selected for "Auto login", the recorder will start up in the logged-out state
after completing the system check. Refer to the following section for "Auto login".
☞
Configure the basic settings relating to user management [Basic]
When the operation window is displayed on the main monitor, enter a user name and
password as follows:
Step 1
Click the [Login] button on the operation screen.
→
The "Login" window will be displayed.
Step 2
Enter a user name and password using on-screen keyboard.
[Operation via recorder's main monitor]
238
To Next Page
Loading...
Need help?
General
