●
The camera no. selected on the recording camera changes to the AI
privacy guard recording display on all settings screens of this recorder, as
shown in the following screen.
●
Select the camera and then click the [Clear] button to clear the assigned
camera no.
●
The settings can be made from this recorder only for some cameras
manufactured by us and Panasonic. Refer to our support website for the
supported cameras. Some functions are not supported depending on the
models of the connected cameras. For further information about detailed
specifications, refer to the operating instructions of the cameras in use.
It is impossible to check the current settings using this recorder.
Set up camera [Camera setup]
Transmit the date & time and text displayed on an image, the refresh rate, the VMD alarm
and the Light control mode etc. settings to the camera. Click the [Setup >] button for each
item to open the respective setup window.
[Setup via recorder's main monitor]
27
To Next Page
Loading...
Need help?
General
