i-PRO WJ-NX310K Series User Manual

E
X
T
x
R
A
I
D
5
R
E
C
O
V
E
R
Y
F
A
I
L
U
R
E
RAID6 Recovery failure [NX410/
NX510]:
MAIN RAID6 RECOVERY FAILURE
EXTx RAID6 RECOVERY FAILURE
Copy media FULL: COPY MEDIUM FULL
Number of data on the copy medium
exceeded:
OVER LIMITATION ON COPY MEDIUM
Network link down detection: NETWORK LINK ERROR
Power failure detection: POWER LOSS
Power failure recovery: POWER RECOVERED
Camera SD memory card error: CAM ccc SD ERR
Camera SD memory write start
command error:
CAM ccc SD START ERR
Camera SD memory write completion
command error:
CAM ccc SD END ERR
Camera SD Image acquisition failure: CAM ccc GET IMG ERR
Camera SD Accumulated recording
time warning:
CAM ccc SD LIFE WARNING (LONG-TERM)
Camera SD Overwrite warning: CAM ccc SD LIFE WARNING (OVER-REWRITTEN)
Camera SD Access error: CAM ccc SD ACCESS ERROR
Camera SD recording failure: CAM ccc SD RECORDING ERROR
Camera SD memory card not
recognized:
CAM ccc SD MEMORY CARD NOT DETECTED
Camera SD memory card capacity
warning:
CAM ccc SD MEMORY CARD CAPACITY WARNING
Camera SD memory card full: CAM ccc SD MEMORY CARD FULL
Camera failure (*): CAM ccc HARDWARE ERROR
Exchange notification of wiper rubber
of camera (*):
CAM ccc REPLACE WIPER RUBBER
* For WV-SUD638 camera only
Changed angle: CAM ccc CHANGED FROM INSTALLATION ANGLE
Recover angle: CAM ccc RECOVERED TO INSTALLATION ANGLE
The trial period for the ext. software
has expired:
CAM ccc EXTENSION SOFTWARE TRIAL PERIOD
EXPIRED
NAS backup error: NAS STORAGE-n ERROR
NAS backup full: NAS STORAGE-n FULL
NAS backup interrupted: NAS STORAGE-n INTERRUPTED
Failover (Operation suspended): FAILOVEROPERATION SUSPENDED
Others
379

i-PRO WJ-NX310K Series Specifications

General

Brand	i-PRO
Model	WJ-NX310K Series
Category	Measuring Instruments
Language	English