Why does my IBM Desktop computer turns off or screen goes blank during activity?
If your IBM Desktop computer turns off or the screen goes blank during activity (for example, when using a joystick): 1. Press the on/off button. 2. Increase the Automatic Power Off time. 3. Disable Rapid Resume and Standby during long periods of activity such as using a joystick.
What to do if my IBM Aptiva Desktop turns off without warning?
If your IBM Desktop turns off unexpectedly, here's what to do: 1. If Standby is enabled, move the mouse. 2. If Rapid Resume and Automatic Power Off are enabled, or the Scheduler feature is set to turn off the system, turn the system back on. 3. Ensure both the system unit and monitor power cords are securely plugged into electrical outlets. 4. Verify all cables are correctly and securely connected to the system unit. 5. Check for blown fuses, tripped circuit breakers, or power failures. 6. Unplug the system unit power cord, wait 10 seconds, and plug it back in. If it doesn't start, press the on/off button.
Why can't I enter password on my IBM Desktop?
If you are unable to enter your password on your IBM Desktop, ensure you are typing the correct password. Also, verify that the keyboard cable is securely connected to the correct keyboard port (not the mouse port) on the back of the system unit.
What to do if IBM Desktop has error code, more than one beep, or continuous beep?
If your IBM Desktop displays an error code, consult “Error codes, descriptions, and corrective actions” on page 52 and follow the listed action. If no error code is displayed, refer to your Services and Support Guide for service information.
Why does my IBM Aptiva Desktop turn off without warning?
If your IBM Desktop turns off unexpectedly, ensure the system unit and monitor power cords are securely plugged into electrical outlets. Also, check for blown fuses, tripped circuit breakers, or a power failure. Verify that all cables are correctly and securely connected to the system unit. If you've enabled the Standby feature, move the mouse to exit Standby. If you're using Rapid Resume with the Automatic Power Off option or the Scheduler feature, simply turn the system unit back on.
Why is application not active when I turn the IBM Desktop on to resume working?
If an application is not active when you turn on your IBM Desktop to resume working, restart the application. Some applications will not operate correctly with Rapid Resume.
Why when I turn on the IBM Desktop, the desktop is not as I left it?
If, when you turn on your IBM Desktop, the desktop is not as you left it: 1. Ensure no one else has used the computer and changed the desktop. 2. Check that Rapid Resume is enabled. 3. Choose Rapid Resume from the Configuration/Setup Utility main menu, and ensure the APM BIOS Mode option is set correctly for your operating system: * OS/2 Warp: “16” or “32 Bit Protected”. * Windows: “32 Bit Protected”. * OS/2 2.1: “16 Bit Protected”. 4. If you are working in Windows, check that “POWER.EXE” is in the CONFIG.SYS file (make sure “REM” does not appear in front of “POWER.EXE”).
What to do if I pressed the on/off button on the IBM Desktop, but the computer has not turned off after 5 minutes?
If you pressed the on/off button on the system unit of your IBM Desktop, but the computer has not turned off after 5 minutes, check your Services and Support Guide for information on obtaining service.
Why does my IBM Desktop computer automatically turns off instead of entering Standby?
If your IBM Desktop computer turns off automatically instead of entering Standby, make sure the Standby timer is set to a shorter duration than the Automatic Power Off timer.
What to do if I can’t enter password on my IBM Desktop?
If you can’t enter your password on your IBM Desktop, follow these steps: 1. Double-check that you are typing the correct password. 2. Ensure the keyboard cable is correctly and securely connected to the keyboard port (not the mouse port) on the back of the system unit. The keyboard port has a symbol next to it. 3. If you have forgotten your password, check your Services and Support Guide for information on obtaining service.
General| CPU | Intel Pentium |
|---|---|
| RAM | 8 MB to 64 MB |
| Operating System | Windows 95 |
| Graphics | S3, ATI |
| Optical Drive | CD-ROM |
| Ports | Serial, Parallel, PS/2 |
| Expansion Slots | ISA, PCI |
To Next Page
