What to do if IBM Aptiva Desktop screen is black with multiple beeps?
If you see a black screen and hear multiple beeps during the self-test of your IBM Desktop, ensure that any recently installed memory modules or adapter cards are correctly installed.
What to do if my IBM Aptiva Desktop turns off without warning?
If your IBM Desktop turns off unexpectedly, here's what to do: 1. If Standby is enabled, move the mouse. 2. If Rapid Resume and Automatic Power Off are enabled, or the Scheduler feature is set to turn off the system, turn the system back on. 3. Ensure both the system unit and monitor power cords are securely plugged into electrical outlets. 4. Verify all cables are correctly and securely connected to the system unit. 5. Check for blown fuses, tripped circuit breakers, or power failures. 6. Unplug the system unit power cord, wait 10 seconds, and plug it back in. If it doesn't start, press the on/off button.
Why can't I enter password on my IBM Desktop?
If you are unable to enter your password on your IBM Desktop, ensure you are typing the correct password. Also, verify that the keyboard cable is securely connected to the correct keyboard port (not the mouse port) on the back of the system unit.
What to do if IBM Desktop has error code, more than one beep, or continuous beep?
If your IBM Desktop displays an error code, consult “Error codes, descriptions, and corrective actions” on page 52 and follow the listed action. If no error code is displayed, refer to your Services and Support Guide for service information.
Why does my IBM Aptiva Desktop turn off without warning?
If your IBM Desktop turns off unexpectedly, ensure the system unit and monitor power cords are securely plugged into electrical outlets. Also, check for blown fuses, tripped circuit breakers, or a power failure. Verify that all cables are correctly and securely connected to the system unit. If you've enabled the Standby feature, move the mouse to exit Standby. If you're using Rapid Resume with the Automatic Power Off option or the Scheduler feature, simply turn the system unit back on.
How to fix IBM Aptiva Desktop when there is no beep during POST?
Make sure that the system unit of your IBM Desktop is turned on.
Why does my IBM Desktop keyboard doesn’t work or only some keys work?
If your IBM Desktop keyboard isn’t working or only some keys work, try the following: 1. Make sure the keyboard cable is correctly and securely connected to the keyboard port (not the mouse port) on the back of the system unit. The keyboard port has a symbol next to it to help you. 2. Move your fingers across the keys to ensure none are stuck. 3. Make sure you are using a screen that allows typing, as some screens do not. 4. Turn the system unit off, wait 10 seconds, and then turn it on again.
Why doesn’t my IBM Desktop go into Standby or automatically power off when the set time has elapsed?
If your IBM Desktop computer doesn’t go into Standby or automatically power off when the set time has elapsed: 1. Avoid touching the mouse or keyboard and starting applications that use the hard disk (like File Manager or a Windows screen saver). These actions reset the timer. 2. If the computer doesn't automatically turn off, ensure the Automatic Power Off option is enabled in Rapid Resume or on the Rapid Resume menu of the Configuration/Setup Utility.
How to fix IBM Desktop mouse that does not move the cursor?
If the mouse does not move the cursor on your IBM Desktop, here’s what you can do: 1. Try using the mouse on a mouse pad. 2. Ensure that the screen you're using supports mouse functionality. 3. Verify that the mouse cable is securely connected to the mouse port (not the keyboard port) on the back of the system unit; the mouse port has a symbol next to it. 4. Clean the mouse. 5. Turn the system unit off, wait 10 seconds, and then turn it on again.
What to do if I can’t enter password on my IBM Desktop?
If you can’t enter your password on your IBM Desktop, follow these steps: 1. Double-check that you are typing the correct password. 2. Ensure the keyboard cable is correctly and securely connected to the keyboard port (not the mouse port) on the back of the system unit. The keyboard port has a symbol next to it. 3. If you have forgotten your password, check your Services and Support Guide for information on obtaining service.
General| CPU | Intel Pentium |
|---|---|
| RAM | 8 MB to 64 MB |
| Operating System | Windows 95 |
| Graphics | S3, ATI |
| Optical Drive | CD-ROM |
| Ports | Serial, Parallel, PS/2 |
| Expansion Slots | ISA, PCI |
To Next Page
