IBM Aptiva Hardware Maintenance Guide

4-18
Memory (DIMM)
ATTENTION:
Memory modules are sensitive to static discharge.
•
Press down and out the levers on both sides of the socket.
•
Lift the DIMM to remove.
CAUTION:
Place your forefingers on the top of the DIMM before you press
the holding clips to gently disengage the DIMM from the socket.
Figure 4- 17 Remove memory modules (DIMM)

IBM Aptiva Specifications

General

CPU	Intel Pentium
RAM	8 MB to 64 MB
Operating System	Windows 95
Graphics	S3, ATI
Optical Drive	CD-ROM
Ports	Serial, Parallel, PS/2
Expansion Slots	ISA, PCI