IBM Aptiva Hardware Maintenance Guide

4-10
Bay 4, 5 (3.5-In. Diskette/Hard Disk Drives)
•
Disconnect the cables (note location of cables).
NOTE
: Please refer to the note on Bays 1, 2, 3 (5.25-In. Internal/External
Bays) on page 4-9.
•
Press the lever and rotate outward.
•
Pull carefully and slowly as soon as the warning arrow appears.
•
The drive frame becomes free after the line behind the arrow appears.
Remove the frame from the chassis.
NOTE
: Bay 4 is for external drive and Bay 5 is for internal drive only.
Figure 4- 8 Bay 4 (3.5-In)

IBM Aptiva Specifications

General

CPU	Intel Pentium
RAM	8 MB to 64 MB
Operating System	Windows 95
Graphics	S3, ATI
Optical Drive	CD-ROM
Ports	Serial, Parallel, PS/2
Expansion Slots	ISA, PCI