IBM Aptiva Hardware Maintenance Guide

4-28
Indicator LED and Cable
•
Push in on the indicator LED and remove from the rear.
•
Disconnect the LED and cable from the system board.
Figure 4- 30 Remove the LED indicator
NOTE:
When reinstalling the LED assembly, please be note, the EMI core
should be approximately 20mm from lower cable tie.

IBM Aptiva Specifications

General

CPU	Intel Pentium
RAM	8 MB to 64 MB
Operating System	Windows 95
Graphics	S3, ATI
Optical Drive	CD-ROM
Ports	Serial, Parallel, PS/2
Expansion Slots	ISA, PCI