Solving hardware problems
43
Troubleshooting
Audio disc does not
automatically play when
inserted into CD or DVD
drive
Make sure you have enabled AutoPlay. To enable
AutoPlay, follow these steps:
1
From the Windows desktop, double-click the
My
Computer
icon.
2
In the My Computer window, double-click the
Control
Panel
folder.
3
In the Control Panel window, double-click the
System
icon.
4
In the System Properties window, click the
Device
Manager
tab.
5
Double-click the
CD-ROM
or
DVD-ROM
list item and
then double-click the listed CD-ROM option.
6
In the Properties window, click the
Settings
tab.
7
Under
Options
, click the
Auto insert notification
check
box to add a check to the box.
8
Click
OK
.
Keyboard doesn’t work or
only some keys work
1
Make sure the keyboard cable is correctly and
securely connected to the keyboard port (not the
mouse port) on the back of the system unit.
The keyboard port has a grey label and this symbol
next to it:
2
Move your fingers across all of the keys. Make sure
no keys are stuck.
3
Make sure that you have not disabled keys like the
Rapid Access keys.
4
Make sure you are using a program that allows typing.
Some programs do not.
5
Turn off the system, wait 15 seconds, and then turn
the system on again.
If the problem is... Here’s what to do...
If any of these problems continue after taking the actions
listed, run the diagnostics programs that came with your
computer. If you need service, see “HelpWare support and
services” on page 79.
66xarg.book : 66xach3.fm Page 43 Tuesday, June 30, 1998 10:18 AM
To Next Page
Loading...
Need help?
General
