v Embedded diagnostic software that displays status for head cleaning, library,
and tape drive operation and provides test functions to help isolate problems.
v Field upgradeable
v Configurable from 1 up to 5 tape mailslots
Unpacking the library
To unpack the library, follow these instructions.
1. Remove the packing foam from the top of the library.
v Statement 4
34.5 kg (76 lbs)
2. With at least three people lifting the library, remove it from the shipping carton.
3. Remove the library from the shipping bag.
4. Place the library in the installation location. If it is a rack-mount library, place it
near the server rack.
Note: For stand-alone installations, see “Installing the library” on page 7.
Attention: Do not force the magazine door open. Wait until the library is turned
on and the OCP displays the Open Doors! message to verify that the library locking
mechanism has completed unlocking.
4 LTO Library: User’s Guide
To Next Page
Loading...
Need help?
General