182 IBM Midrange System Storage Hardware Guide
– Create your own configuration: This allows you to customize the configuration by
selecting the additional parameters shown in Figure 4-45.
Figure 4-45 Customized automatic configuration
The options for both Fibre Channel or SATA drives are:
• RAID level: 0, 1, 3, 5, or 6 (or RAID 10 by selecting multiple drives in RAID 1)
• Number of logical drive groups or arrays
• Number of drives per array
• Number of hot spares
• Number of logical drives per array
• I/O type characteristics
To Next Page
Loading...
