EasyManua.ls Logo

IBM System x3100 M4

IBM System x3100 M4
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
806f000f-22010bxx The System %1
encountered a POST
Error.
(%1 =
CIM_ComputerSystem.
ElementName)
Error Firmware BIOS
(ROM) corruption
was detected
during POST.
(Sensor = ABR
Status)
1. Make sure the server meets the
minimum configuration to start.
2. Recover the server firmware from
the backup page:
a. Restart the server.
b. At the prompt, press F3 to
recover the firmware.
3. Update the server firmware to the
latest level (see “Updating the
firmware” on page 267).
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the
device is part of a cluster solution,
verify that the latest level of code
is supported for the cluster solution
before you update the code.
4. Remove components one at a
time, restarting the server each
time, to see if the problem goes
away.
5. If the problem remains, (trained
technician) replace the system
board.
816f000f-22010bxx The System %1
encountered a POST
Error deasserted.
(%1 =
CIM_ComputerSystem.
ElementName)
Error Firmware BIOS
(ROM) corruption
was deasserted
during POST.
(Sensor = ABR
Status)
No action; information only.
806f000f-2201xxxx The System %1
encountered a POST
Error.
(%1 =
CIM_ComputerSystem.
ElementName)
Error The System
encountered a
firmware error.
(Sensor =
Firmware Error)
1. Make sure the server meets the
minimum configuration to start.
2. Update the server firmware on the
primary page.
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the
device is part of a cluster solution,
verify that the latest level of code
is supported for the cluster solution
before you update the code.
3. (Trained technician only) Replace
the system board.
58 IBM System x3100 M4 Type 2582: Problem Determination and Service Guide

Table of Contents

Other manuals for IBM System x3100 M4

Related product manuals