EasyManua.ls Logo

IBM System x3100 M4

IBM System x3100 M4
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
806f0313-1701xxxx A software NMI has
occurred on system
%1.
(%1 =
CIM_ComputerSystem.
ElementName)
Error A software NMI
has occurred.
1. Check the device driver.
2. Reinstall the device driver.
3. Update all device drivers to the
latest level.
4. Update the firmware (UEFI and
IMM2) (see “Updating the
firmware” on page 267).
81030012-2301xxxx Sensor OS RealTime
Mod state has
deasserted.
Info OS RealTime Mod
state has
deasserted.
No action; information only.
80070219-0701xxxx Sensor Sys Board Fault
has transitioned to
critical.
Error A sensor has
changed to Critical
state from a less
severe state.
1. Check the system-event log.
2. Check for an error LED on the
system board.
3. Replace any failing device.
4. Check for a server firmware
update.
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the
device is part of a cluster solution,
verify that the latest level of code
is supported for the cluster solution
before you update the code.
5. (Trained technician only) Replace
the system board.
806f020f-2201xxxx The System %1
encountered a POST
Progress.
(%1 =
CIM_ComputerSystem.
ElementName)
Info A POST progress
has been
detected.
(Sensor =
Progress)
No action; information only.
806f0312-2201xxxx Entry to aux log has
asserted.
Info Entry to aux log
has been
detected.
No action; information only.
80080128-2101xxxx Low security jumper
presence has asserted.
Info The low security
jumper has been
detected.
No action; information only.
81030006-2101xxxx Sig verify fail has
deasserted.
Info The sig verify fail
has deasserted.
No action; information only.
Web interface messages
40000001-
00000000
IMM Network
Initialization Complete.
Info An IMM network
has completed
initialization.
No action; information only.
Chapter 3. Diagnostics 61

Table of Contents

Other manuals for IBM System x3100 M4

Related product manuals