IBM System x3100 M4

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000002-
00000000
Certificate Authority
[arg1] has detected a
[arg2] Certificate Error.
Error A problem has
occurred with the
SSL Server, SSL
Client, or SSL
Trusted CA
certificate that has
been imported into
the IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated by the
Generate a New
Key and
Certificate
Signing Request
link.
1. Make sure that the certificate that
you are importing is correct and
correctly generated.
2. Try importing the certificate again.
40000003-
00000000
Ethernet Data Rate
modified from [arg1] to
[arg2] by user [arg3].
Info The specified user
has changed the
Ethernet data rate
of the Integrated
Management
Module external
network interface
to the specified
value.
No action; information only.
40000004-
00000000
Ethernet Duplex setting
modified from [arg1] to
[arg2] by user [arg3].
Info The specified user
has changed the
Ethernet duplex
setting of the
Integrated
Management
Module external
network interface
to the specified
value.
No action; information only.
40000005-
00000000
Ethernet MTU setting
modified from [arg1] to
[arg2] by user [arg3].
Info The specified user
has changed the
Ethernet maximum
transmission unit
(MTU) setting of
the Integrated
Management
Module external
network interface
to the specified
value.
No action; information only.
62 IBM System x3100 M4 Type 2582: Problem Determination and Service Guide