IBM System x3100 M4

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000017-
00000000
ENET[0]
IP-Cfg:HstName=%1,
IP@%2, NetMsk=%3,
GW@=%4.
(%1 =
CIM_DNSProtocol
Endpoint.Hostname; %2
=
CIM_StaticIPSettingData.
IPv4Address; %3 =
CIM_StaticIPSettingData.
SubnetMask; %4 =
CIM_StaticIPSettingData.
DefaultGatewayAddress)
Info An IMM IP
address and
configuration have
been assigned
using client data.
No action; information only.
40000018-
00000000
LAN: Ethernet[0]
interface is no longer
active.
Info The IMM Ethernet
interface has been
disabled.
No action; information only.
40000019-
00000000
LAN: Ethernet[0]
interface is now active.
Info The IMM Ethernet
interface has been
enabled.
No action; information only.
4000001a-
00000000
DHCP setting changed
to [arg1] by user [arg2].
Info The specified user
has changed the
DHCP setting of
the Integrated
Management
Module external
network interface.
No action; information only.
4000001b-
00000000
Management Controller
[arg1]: Configuration
restored from a file by
user [arg2].
Info The specified user
has restored the
Integrated
Management
Module (IMM)
configuration from
a previously saved
configuration file.
Some
configuration
settings might
require that the
IMM be restarted
before they take
effect.
No action; information only.
66 IBM System x3100 M4 Type 2582: Problem Determination and Service Guide