IBM System x3100 M4

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000012-
00000000
Remote access attempt
failed. Invalid userid or
password received.
Userid is '%1' from
WEB browser at IP
address %2.
(%1 = user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
Error A user has
attempted to log in
from a web
browser by using
an invalid login ID
or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
40000013-
00000000
Remote access attempt
failed. Invalid userid or
password received.
Userid is '%1' from
TELNET client at IP
address %2.
(%1 = user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
Error A user has
attempted to log in
from a Telnet
session by using
an invalid login ID
or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
40000014-
00000000
The [arg1] on system
[arg2] cleared by user
[arg3].
Info The specified user
has deleted
system log events
or audit log events.
No action; information only.
40000015-
00000000
IMM reset was initiated
by user %1.
(%1 = user ID)
Info The Integrated
Management
Module has been
reset. The logs
provide additional
details.
No action; information only.
40000016-
00000000
ENET[0]
DHCP-HSTN=%1,
DN=%2, IP@=%3,
SN=%4, GW@=%5,
DNS1@=%6.
(%1 =
CIM_DNSProtocol
Endpoint.Hostname; %2
= CIM_DNSProtocol
Endpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.
IPv4Address; %4 =
CIM_IPProtocolEndpoint.
SubnetMask; %5 = IP
address,
xxx.xxx.xxx.xxx;%6=
IP address,
xxx.xxx.xxx.xxx)
Info The DHCP server
has assigned an
IMM IP address
and configuration.
No action; information only.
Chapter 3. Diagnostics 65