Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000022-
00000000
SSL data in the IMM
configuration data is
invalid. Clearing
configuration data
region and disabling
SSL+H25.
Error There is a problem
with the certificate
that has been
imported into the
IMM. The imported
certificate must
contain a public
key that
corresponds to the
key pair that was
previously
generated through
the Generate a
New Key and
Certificate
Signing Request
link.
1. Make sure that the certificate that
you are importing is correct.
2. Try to import the certificate again.
40000023-
00000000
Flash of %1 from %2
succeeded for user %3.
(%1 =
CIM_ManagedElement.
ElementName; %2 =
Web or LegacyCLI; %3
= user ID)
Info A user has
successfully
updated one of the
following firmware
components:
v IMM main
application
v IMM boot ROM
v Server firmware
(UEFI)
v Diagnostics
v System power
backplane
v Remote
expansion
enclosure power
backplane
v Integrated
service
processor
v Remote
expansion
enclosure
processor
No action; information only.
40000024-
00000000
Flash of %1 from %2
failed for user %3.
(%1 =
CIM_ManagedElement.
ElementName; %2 =
Web or LegacyCLI; %3
= user ID)
Info An attempt to
update a firmware
component from
the interface and
IP address has
failed.
Try to update the firmware again.
Chapter 3. Diagnostics 69
To Next Page
Loading...
