Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000070-
00000000
SNMP Traps enabled
by user [arg1]:
EnabledAlerts=[arg2],
AllowedFilters=[arg3].
Info A user enabled the
SNMP Traps
configuration.
No action; information only.
40000071-
00000000
The power cap value
changed from [arg1]
watts to [arg2] watts by
user [arg3].
Info Power Cap values
changed by user.
No action; information only.
40000072-
00000000
The minimum power
cap value changed from
[arg1] watts to [arg2]
watts.
Info Minimum Power
Cap value
changed.
No action; information only.
40000073-
00000000
The maximum power
cap value changed from
[arg1] watts to [arg2]
watts.
Info Maximum Power
Cap value
changed
No action; information only.
40000074-
00000000
The soft minimum
power cap value
changed from [arg1]
watts to [arg2] watts.
Info Soft Minimum
Power Cap value
changed.
No action; information only.
40000075-
00000000
The measured power
value exceeded the
power cap value.
Warning Power exceeded
cap.
No action; information only.
40000076-
00000000
The new minimum
power cap value
exceeded the power
cap value.
Warning Minimum Power
Cap exceeds
Power Cap.
No action; information only.
40000077-
00000000
Power capping was
activated by user [arg1].
Info Power capping
activated by user.
No action; information only.
40000078-
00000000
Power capping was
deactivated by user
[arg1].
Info Power capping
deactivated by
user.
No action; information only.
40000079-
00000000
Static Power Savings
mode has been turned
on by user [arg1].
Info Static Power
Savings mode
turned on by user.
No action; information only.
4000007a-
00000000
Static Power Savings
mode has been turned
off by user [arg1].
Info Static Power
Savings mode
turned off by user.
No action; information only.
4000007b-
00000000
Dynamic Power
Savings mode has
been turned on by user
[arg1].
Info Dynamic Power
Savings mode
turned on by user.
No action; information only.
4000007c-
00000000
Dynamic Power
Savings mode has
been turned off by user
[arg1].
Info Dynamic Power
Savings mode
turned off by user.
No action; information only.
Chapter 3. Diagnostics 77
To Next Page
Loading...
