Why can't I set Individual or Group ID on my Icom Transceiver?
If you cannot set an Individual or Group ID on your Icom Transceiver, it's likely that the entered ID code is incorrect. Enter a correct ID code.
How to fix an Icom GM600 that does not turn on?
If your Icom Transceiver isn't turning on, start by checking the connection to both the transceiver and the power supply to ensure they are properly connected. Also, if the fuse blows, repair the problem, and then replace the fuse.
General| Waterproof Rating | IPX7 |
|---|---|
| Power Supply | 13.8 V DC |
| DSC | Yes |
| Display | LCD |
| Mode | FM |
| Voltage | 13.8 V DC |
| Type | Marine VHF Transceiver |
| Frequency Range (Rx) | 156.025 - 163.275 MHz |
| Output Power | 25 W, 1 W |
| External Connections | NMEA 0183 |
Provides detailed procedures for sending distress calls via Channel 16 and DSC.
Outlines critical warnings and cautions regarding power connection, placement, and cleaning.
Covers rules on call priorities, monitoring Channel 16, and privacy of overheard communications.
Identifies and describes the components of the transceiver's front panel.
Step-by-step guide to entering the 9-digit MMSI code during initial power-on.
Explains how to select channels by sequence, number, Channel 16, or the Call channel.
Step-by-step instructions for receiving signals and transmitting voice communications.
Guides on entering and managing DSC Individual and Group IDs.
Explains manual entry of position (latitude/longitude) and UTC time for DSC calls.
Describes how to manage and activate DSC tasks, including the Task List.
How to access and view distress and other messages stored in the received call log.
Configuration options for DSC settings like automatic acknowledgment and alarm status.
How to access and view transmitted calls stored in the log.
Provides procedures for sending various types of distress calls, including simple and regular calls.
Guides for sending various non-distress DSC calls like Individual, Group, and All Ships.
Explains how the transceiver handles incoming DSC calls, including distress and non-distress types.
Step-by-step guide for connecting the transceiver to a DC power source via the PS-310.
To Next Page
