Icom IC-440 - Priority Channel Setting; SCAN OPERATION; Scan Types and Preparation

17
3
BASIC OPERATION
3
■ Priority channel setting
The priority channel, simply recalled by pushing
PRIO
SET࡮P
(PRIO),
and also is automatically monitored during the priority scan.
You can set the only one channel as the priority channel.
“P” appears when the priority channel is set.
D The priority channel selection
➥ Push
PRIO
SET࡮P
(PRIO) to select the priority channel.
• “N/A” appears when the priority channel is not set.
D Set the priority channel
q Select the desired channel. (p. 14)
w Push and hold
PRIO
SET࡮P
(PRIO Set) for 2 sec. to set the dis-
played channel as the priority channel.
• “P” appears.
D Cancel the priority channel setting
➥ Push
F
SET
(Function) to enter the function mode, then push
and hold
PRIO
SET࡮P
(PRIO Clear) for 2 sec. to cancel the priority
channel setting.
• “P” disappears.
The priority channel
is selected.
When the priority
channel is not set.
The selected channel is set
to the priority channel.
“P” appears
The priority channel
is cancelled.
IC-440-1.indd17IC-440-1.indd17 2008/06/2515:59:342008/06/2515:59:34