Icom IC-440 - Receiving Calls, Quiet Mode, and Stun

28
6
TONE SQUELCH OPERATION
■ Pocket beep operation
This function uses CTCSS (subaudible) tones and DTCS
code for calling and can be used as a “common pager” to in-
form you that someone has called while you were away from
the transceiver.
D Waiting for a call from a specifi c station
q Select the desired channel except for channels 5 and 35.
(p. 14)
w Set the desired CTCSS tone/DTCS code in set mode.
(pgs. 26, 41)
e Push and hold
MONI
TSQL
(TSQL) for 2 sec. several times until
“TSQL ë” appears to activate the pocket beep.
r When the received signal includes a matching tone or
code, the transceiver emits beep tones every 10 sec. and
“ ë” blinks.
t Push [PTT] to answer and to stop blinking.
• Tone squelch is automatically selected.
Blinks
IC-440-1.indd28IC-440-1.indd28 2008/06/2515:59:392008/06/2515:59:39