Icom IC-440 - Beep Level; Beep Tone; Lcd Backlight Brightness; Lcd Contrast

42
9
SET MODE
D LCD backlight brightness
The LCD backlight brightness can be adjusted from 0 (dark)
to 7 (bright).
D LCD contrast
The contrast level of the LCD can be adjusted from 0 (dark)
to 7 (bright).
D Beep tone
You can select silent operation by turning key-touch beep
tones OFF, or you can have confi rmation beeps sound at the
push of a key by turning beep tones ON.
D Beep level
Set the key-touch beep output level HIGH or LOW.
Bright level 4 (default) Bright level 0
Contrast level 5 (default) Contrast level 0
Beep tone ON (default) Beep tone OFF
Beep level High (default) Beep level Low
IC-440-1.indd42IC-440-1.indd42 2008/06/2515:59:442008/06/2515:59:44