Icom IC-440 - Pocket Beep Functionality

24
5
SCAN OPERATION
■ Group and priority scans
Group and priority scans repeatedly watch a priority chan-
nel while scanning specified channels. This is useful when
waiting for a call on the priority channel or several specified
channels.
Group and priority scans behave differently when transmit-
ting. Group scan can transmit on a priority channel or busy
channel, and priority scan can only transmit on a priority
channel.
q Push
O࡮G࡮P
RS
(Scan Mode) several times to select the group or
priority scan. (p. 22)
• “ ” appears when the group scan is selected, and “ ” ap-
pears when the priority scan is selected.
w Set the priority channel if desired when the priority scan
type is selected in step q. (p. 17)
• When the priority channel is not set, scan start channel is moni-
tored during the priority scan.
e Push
SCAN
TAG
(Scan) to start the scan.
r When receiving a signal, the scan pauses and resumes
according to the selected scan resume condition. (p. 23)
t Push
SCAN
TAG
(Scan) to cancel the scan.
Appears
Group scan is selected.
Appears
Appears
Priority scan is selected.
Blinks
Scan start channel
Blinks
Priority channel
Group scan starts.
Priority scan starts.
IC-440-1.indd24IC-440-1.indd24 2008/06/2515:59:372008/06/2515:59:37