Icom IC-440 - SET MODE CONFIGURATION; Entering and Navigating Set Mode

36
8
OTHER FUNCTIONS
r Push
SCAN
TAG
*
to select the desired digit to be edited.
t Set the desired digit via or .
y Push
SCAN
TAG
*
to set the digit and the editable digit move to
right automatically.
u Repeat steps t and y to input the desired frequency.
i Push and hold
F
SET
* for 2 sec. to return to the normal op-
eration condition.
• RX frequency setting is memorised to the channel.
• Pushing
F
SET
* also returns to the normal operation condition.
In this case, the RX frequency setting is not memorised to the
channel. (temporary operation)
*Regardless of the assigned key function.
(Wide channel spacing) (Narrow channel spacing)
(Wide channel spacing) (Narrow channel spacing)
(Wide channel spacing) (Narrow channel spacing)
(Wide channel spacing) (Narrow channel spacing)
IC-440-1.indd36IC-440-1.indd36 2008/06/2515:59:422008/06/2515:59:42